LAN-XI - Type 3660D and Type 2831 Battery Module

11-module LAN-XI Front-end Frame Type 3660-D

Features

Houses up to 11 input/output modules (up to 66 channels)
Robust casing for industrial and hard everyday use
Mains (90 − 264VAC, 47 − 63Hz) or DC powered (10 − 32V)
Silent operation (cooling fans turn on only at maximum safe temperature)
Phase- and sample-synchronous measurement with other PULSE front-ends including IDAe
Plug and play modules can be removed for field measurements using a single module or swapped for calibration or repair
Modules can be locked or screwed in place

Type 3660-D is a data acquisition system comprising a frame that contains up to 11 modules that can be freely chosen from the available I/O modules (see Fig. 1 and Table 1). With a 1gigabit LAN backbone, the frame provides full throughput of all channels. With synchronisation cables, the frame is fully compatible with IDAe hardware, maintaining phase- and samplesynchronous measurements.

Power Supply

Type 3660-D has an integral transformer for connection of a 90 − 264VAC, 47 − 63Hz mains power supply or can be powered from a 10 − 32VDC supply. In addition, each frame can house up to two Battery Modules Type 2831, which are capable of powering nine input/output modules for up to 40 minutes. Batteries can be hot-swapped to extend operation time. The frame cannot be powered by PoE.

DC Output

To provide power for accessories such as a LAN switch or wireless LAN for interconnecting more front-ends, Type 3660-D has a 12VDC output (EIAJ-05 connector) with current protection. Cables for these accessories must be ordered separately.

Silent Operation, Cooling

Operation is silent as long as the temperature if the unit is within safety limits. If the maximum safe operating temperature is reached, cooling fans activate. The SPL is <30 dB at 1m.

Battery Module Type 2831

The battery module is a rechargeable Li-Ion battery with an output voltage of 14.8V and a capacity of 6400mAh. On the front panel, 5 LED status indicator shows the remaining capacity.

The battery module can be charged in a LAN-XI frame, or using a dedicated external charger.

The battery module is the same size as a standard LAN-XI input/output module.