Output Channels

Generator output channels for system excitation for acoustic and vibration measurements.

Features

Type 3109: 2 output channels: Full generator functionality to 25.6 kHz
Type 3110: 1 output channel: Full generator functionality to 102.4 kHz
Types 7539, 7539 A (3560B-030/040), 7540, 7540A (3560B-130/140): 1 output channel: Full generator functionality to 25.6 kHz
Waveforms determined by PULSE software (see BU0229)
Types 7537, 7537 A (3560B-010/020), 7538, 7538A (3560B-110/120): 1 output channel: Sine waveforms up to 25.6 kHz; sine wave only

Type 3109

The two output channels on Type 3109 can be used as signal generators with a frequency range from 0 to 25.6 kHz and can supply all the signals necessary for performing system analysis.

Type 3109 is designed around a powerful digital signal processor and a 24-bit D/A converter, and has exceptional flexibility, stability and accuracy. Output levels are adjustable in hardware, with maximum output ranging from 5mV to 5V RMS. Lower levels are possible by scaling the signal to the D/A converter. The signal is provided by a BNC connector and can be referred to ground or floating. It is possible to add a DC offset, but any unwanted DC offset is automatically removed.
The connector at the top of the module allows connection to an emergency stop control, allowing you to stop the generators immediately.

Type 3110

The output channel on Type 3110 can be used as signal generator with a frequency range from 0 to 102.4 kHz and can supply all the signals necessary for performing system analysis. The generators are controlled from PULSE software.

Type 3110 is designed around a powerful digital signal processor and a 24-bit D/A convertor, and has exceptional flexibility, stability and accuracy. The full dynamic output range is obtained from 7mV to 7V peak. Lower levels are possible by scaling the signal to the D/A converter. The signal is provided by a BNC connector and can be referred to ground or floating. It is possible to add a DC offset, but any unwanted DC offset is automatically removed.

An input monitor signal is available on a BNC connector for each input channel. The signal is taken after the high-pass filter but before the anti-aliasing filter. The signal level is 2.236Vp for full-scale input in any range. The signal is always referred to (chassis) ground.

Types 7539, 7539 A, 7540, 7540A

The output channels on these modules can be used as signal generators with a frequency range from 0 to 25.6 kHz and can supply all the signals necessary for performing system analysis. The modules are designed around a powerful digital signal processor and a 24-bit D/A converter, and have exceptional flexibility, stability and accuracy. The signal is provided by a BNC connector and can be referred to ground or floating. It is possible to add a DC offset, but any unwanted DC offset is automatically removed.

Types 7537, 7537 A, 7538, 7538A

The output channels on these modules can be used as simple, high-quality sine tone generators with a frequency range from 0.001 to 25.6 kHz. The maximum output voltage is 5Vrms delivered in one output range through a 24-bit D/A converter. The signal is provided by a BNC connector, and may be referred to ground or floating.

Available Generator Modules