½-inch diffuse-field microphone with Type 2669-B preamplifier, 3.15 Hz to10 kHz , 200 V polarization
Designed for general random-incidence measurements and for noise measurements in accordance with ANSI standards.Angebot anfordern
Type 4943-B-001 comes with a cable including an older Brüel & Kjær preamplifier. Input connector for use with older equipment, this cable does not support TEDS.
- Diffuse-field measurements
- In-car measurement
THIS MICROPHONE IS A FACTORY-ASSEMBLED COMBINATION OF:
The unit is assembled in a clean-room environment and sealed together, after which it is assigned one single type number and one single serial number. This means that the combined unit has better precision and long-time stability, and is handled as one complete unit.
The unit also contains TEDS, which means that information about the serial number, type and sensitivity is stored within it.
THE BENEFITS OF USING A MICROPHONE-PREAMPLIFIER COMBINATION ARE:
- Better stability and precision. Because the unit is assembled in clean-room facilities, there is no contamination.
- Ease of use. Your analyzer front-end and software will automatically detect the type number, serial number and sensitivity because of the built-in TEDS technology. There is no need to enter this manually for every channel.
- Calibration integration. The TEDS technology means the microphone is automatically detected and identified by your data acquisition software, allowing it to be easily integrated with your calibration database.
- Fewer errors. As your data acquisition software automatically knows the microphone type, serial number and sensitivity, manual inputs are greatly reduced – reducing human errors.
- Dynamic range
- 15.9 – 148 dB
- Frequency range
- 3.15 – 10000 Hz
- Inherent noise
- 15.9 dB A
- Lower limiting frequency -3dB
- 3.15 Hz
- Diffuse Field
- Ext polarized
- Polarization voltages
- 200 V
- Pressure coefficient
- -0.008 dB/kPa
- 50 mV/Pa
- Temperature coefficient
- -0.015 db/ºC
- Temperature range
- -20 – 80 C
- Sound field
- Input type
- Microphone type
- Diffuse Field