TYPE 4393

High-Frequency Low-Weight Piezoelectric Charge Accelerometer

Type 4393 Piezoelectric Charge Accelerometer is designed for high-frequency low weight measurements. Delivered with cable.

Angebot anfordern

Type 4393 is a piezoelectric, DeltaShear®, Unigain® accelerometer with side connector. Type 4393 features M3 receptacle for output connection and has an M3 hole for mounting.

USE SCENARIOS

CHARACTERISTICS

This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).

The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular centre post. The ring prestresses the piezoelectric elements to give a high degree of linearity. The charge is collected between the housing and the clamping ring. The piezoelectric element used is a PZ 23 lead zirconate titanate element. The housing material is titanium.

CALIBRATION

The sensitivity given in the calibration chart has been measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.

Freq. range
0.1 – 16500 Hz
Temperature
-74 – 250 ℃
Weight
2.4 gram
Sensitivity
0.316 pC/ms^-2
Residual Noise Level in Spec Freq Range (rms) ±
0.52 mg
Maximum Operational Level (peak)
5000 g
Connector
M3
Mounting
Stud
Accessory Included
AO 0283
Clip/Stud/Screw included
YQ 2003
Output
Charge-PE
Unigain
Yes
Triaxial
No
TEDS
No
Applications
Miniature
Unit
pC
Resonance frequency
55 kHz
Maximum Shock Level (± peak)
25000 g