TYPE 2670

¼-inch microphone preamplifier, integral 2m cable with 7-pin LEMO plug

Designed to operate over a wide range of temperature, humidity and other environmental conditions.

Request a quote

The preamplifier Type 2670 is very compact and operates over a wide range of temperature, humidity and other environmental conditions.

USE SCENARIOS

  • Sound measurements with 1/4- and 1/8-inch Brüel & Kjær and other compatible microphones
  • Sound intensity probes

FEATURES

  • Full electromagnetic compatibility (EMC)
  • LEMO connector for instrument input socket
  • Wide dynamic range
  • Very low inherent noise, high input impedance
  • Low output impedance and high output current allow use with long extension cables
  • Wide working temperature range
  • Excellent phase linearity
The high distortion limit together with an extremely low inherent noise level gives a wide dynamic range. You can connect ¼" microphones directly and 1/8-inch types using an adaptor. The preamplifier, cable and its connectors all fulfil EMC requirements. You can verify the condition of the microphone, preamplifier and cable on-site using its patented charge injection calibration (CIC) technique.

The low output impedance and high output current capability mean that you can use long cables between the preamplifier and your measuring instrument without loss of signal quality. 

Diameter
1/4
Optimised for
Phase
Connector at preamplifier
Fixed (2 m)
Connector at instrument/cable
LEMO 1B, 7-pin
Calibration facility
Charge Injection Calibration
Polarization voltage support
Yes
Supply voltage
± 14 to ± 60
Max output voltage (peak)
55
Max output current (peak)
20
Frequency range
15 to 200000
Attenuation
<0.4
Noise A-weighted, typical
4
Noise 22,4 Hz to 300 kHz, typical
14
Input impedance
15||0.25
TEDS UTID
1025 from serial number 2248944