MODELO 4394

Acelerómetro CCLD piezoeléctrico en miniatura

Acelerómetro CCLD (Base aislada, cable incluido) diseñado para mediciones en estructuras ligeras, en presencia de vibraciones relativamente elevadas y de alta frecuencia.

Solicitar oferta

Type 4394 is a piezoelectric DeltaShear, Unigain accelerometer with side connectors. It features an M3 connection and can be mounted on the test object with an M3 threaded stud, and has a ceramic isolated base.

CHARACTERISTICS

This miniature accelerometer may be treated as a voltage source. The sensitivity is expressed in terms of voltage per unit acceleration (mV/ms-2)

The sensitivity given in the calibration chart is measured at 159.2 Hz. For a 95% confidence level, the accuracy of the factory calibrated unit is +/- 0.7%.

USE SCENARIOS

  • Shock and vibration measurement and analysis
  • Vibration monitoring
  • Modal and structural analysis
  • Vibration test control
  • Production and quality control

The DeltaShear design involves three piezoelectric elements and three masses in a triangular configuration around a central triangular post.

A clamping ring pre-stresses these elements to give a higher degree of linearity. The signal is collected between the housing and the clamping ring and amplified in the built-in CCLD preamplifier.

*CCLD: Constant Current Line Drive - also known as DeltaTron (IEPE compatible)

TYPE 4394 ACCELEROMETER INCLUDES

  • Carrying box
  • Calibration chart
  • Cable: M3 (M) to 10 - 32 UNF (M), 1,2 m, 250° C / 248° F
  • Three steel stud with flange, M3/M3, 3.5 mm (YS-8321)
Freq. range
1 – 25000 Hz
Temperature
-50 – 125 ℃
Weight
2.9 gram
Sensitivity
1 mV/ms^-2
Residual Noise Level in Spec Freq Range (rms) ±
2500 µg
Maximum Operational Level (peak)
500 g
Connector
M3
Mounting
Stud
Accessory Included
AO 1381
Clip/Stud/Screw included
YS-8381
Output
CCLD
Unigain
No
Triaxial
No
TEDS
No
Applications
Miniature
Unit
mV
Resonance frequency
52 kHz
Maximum Shock Level (± peak)
10000 g