TYPE 4529-B
Triaxial CCLD Accelerometer
With a high dynamic range, this triaxial CCLD accelermeter covers a wide range of applications, including on‐road and modal testing.
견적 요청하기The family of Triaxial CCLD / IEPE Accelerometer Type 4529 replaces the extremely popular Type 4506 family, using the same flexible mounting accessories to save set-up time and ensure accurate local coordination. Due to their high dynamic range, the accelerometers cover a wide range of applications, including on-road and modal testing.
To make mounting as flexible as possible, the accelerometer housing has slots to be used in combination with a selection of mounting clips. The clips are attached to the test object with glue or double-sided, adhesive tape. This design allows the accelerometer to be easily fitted to and removed from a number of different objects, for example, during calibration.
USE SCENARIOS
- Multi‐purpose test applications due to a high dynamic range
- Multi‐channel modal and structural analysis measurements
- On‐road vechicle test
Triaxial Accelerometer Type 4529 requires a cable with a 4-pin Microtech connector. Brüel & Kjær can supply cables with connector configurations of two 4-pin Microtech connectors, 4-pin Microtech to 3 × BNC connectors and 4-pin Microtech to 3 × 10–32 UNF connectors for a range of temperatures. For powering two accelerometers from a D-range subconnector, cable AO-0536 is available.
- Freq. range
- 0.3 – 12800 Hz
- Temperature
- -60 – 125 ℃
- Weight
- 14.5 gram
- Sensitivity
- 10 mV/ms^-2
- Residual Noise Level in Spec Freq Range (rms) ±
- mg
- Maximum Operational Level (peak)
- 71 g
- Connector
- 4-pin
- Mounting
- Clip
- Clip/Stud/Screw included
- Clip
- Output
- CCLD
- Unigain
- No
- Triaxial
- Yes
- TEDS
- Yes
- Applications
- Miniature, Modal
- Unit
- mV
- Resonance frequency
- X39-Y19-Z19 kHz
- Maximum Shock Level (± peak)
- 5100 g