Fonometro - Misuratore del livello di rumore

Gli strumenti e gli analizzatori di fonometri di Brüel & Kjær sono progettati per la precisione di misura di classe 1, la facilità d'uso e la flessibilità, senza precedenti. In effetti, i nostri fonometri di ultima generazione possono essere gestiti direttamente tramite smartphone e, con l'aggiunta delle nostre applicazioni a espansione di funzionalità, è possibile personalizzare il fonometro per qualsiasi attività di misurazione.

Sono passati più di 60 anni da quando Brüel & Kjær hanno inventato il primo fonometro portatile al mondo. E siamo ancora leader in questo settore oggi.


Il fonometro B&K 2245 è una soluzione di facile utilizzo per attività di misurazione del rumore dedicate. Lo strumento viene fornito con una gamma di app, tutte su misura e dotate di funzionalità specifiche per il lavoro da svolgere.


B&K type 2250 e type 2270
Fonometro / Analizzatore

Con un design pluripremiato basato su ricerche approfondite di tecnici, ingegneri e consulenti, B&K type 2250 e type 2270, hanno entrambi le caratteristiche per gestire le attività di misurazione più complesse.

Mentre type 2250 è uno strumento a canale singolo, type 2270 dispone di due canali per la misurazione simultanea del suono e delle vibrazioni.

Cos'è un fonometro?

Un fonometro è uno strumento progettato per rispondere al suono in modo simile all’orecchio umano. Lo scopo è quello di fornire misurazioni obiettive e riproducibili del livello di pressione sonora (SPL).

I termini fonometro e misuratore del livello di rumore sono comunemente usati per descrivere lo stesso strumento. La differenza principale, quando si parla di fonometri, è la classificazione dell'accuratezza della misurazione, come definita dagli standard internazionali. Naturalmente, tutti gli strumenti per fonometri Brüel & Kjær sono conformi ai più elevati standard nazionali e internazionali.

Per ulteriori informazioni sui termini e le definizioni di base, consulta il nostro Glossario su suono e vibrazioni

Come usare un fonometro

I nostri strumenti di misurazione del suono sono utilizzati in diversi settori e applicazioni, quali:

Nel corso degli anni, Brüel & Kjær ha creato una vasta gamma di primer e guide approfondite che coprono quasi tutti i temi relativi alla misurazione del suono e delle vibrazioni. Come azienda, crediamo nella condivisione della conoscenza, per questo le abbiamo riunite tutte e rese disponibili per il download - sono assolutamente gratuite.

Per accedere alla biblioteca, visitate e iscrivetevi al nostro Knowledge Center

Time weighting specifies how the SLM reacts to changes in sound pressure. It is an exponential averaging of the fluctuating signal, providing an easy-to-read value.

The analyzer applies Fast, Slow and Impulse (or ‘F’, ‘S’ and ‘I’) time weightings, which are the required weightings according to most international and national standards and guidelines. Environmental assessment standards usually specify which time weighting to use.

Time Weighting
The signal is processed through the weighting filters, and the resulting sound pressure level is displayed in decibels (dB) referenced to 20 μPa on the analyzer’s screen. The sound pressure level values are updated at least once per second.

Assessing a fluctuating noise level means getting a value for a level that is, in simple terms, the average level. The ‘equivalent continuous sound level’, Leq, is known around the world as the essential averaged parameter.

Leq is the level that, had it been a steady level during the measurement period, would represent the amount of energy present in the measured, fluctuating sound pressure level. It is a measure of the averaged energy in a varying sound level. It is not a direct measure of annoyance, though extensive research has shown that Leq correlates well with annoyance.

Leq can be measured directly with most professional sound level meters, and is sometimes called an integrating sound level meter. If an A-weighting filter is used, it is expressed as LAeq, the measurement of the equivalent continuous sound level using the A-weighted filter network
Frequency weighting adjusts how the sound level meter responds to different sound frequencies. This is necessary because the human ear’s sensitivity to sound varies according to the sound’s frequency.

IEC 61672-1 (international standard) defines frequency weightings A, C and Z, but other frequency weightings are occasionally used in specialized applications.
Frequency Rating

A-weighting – dBA/dB(A)
A-weighting adjusts a signal in a way that resembles the human ear’s response at medium-range levels. It is based on the 40 dB equal loudness curve. The symbols for the noise parameters often include the letter ‘A’ (for example, LAeq) to indicate that frequency weighting has been included in the measurement.

A-weighting is required for nearly all environmental and workplace noise measurements and is specified in international and national standards and guidelines. A-weighting filters cover the full audio range, 10 Hz to 20 kHz.

C-weighting – dBC/dB(C)
The response of the human ear varies with the sound level. C frequency weighting corresponds to the 100 dB equal loudness curve, that is to say, the human ear’s response at fairly high sound levels.

C-weighting is mainly used when assessing peak values of high sound pressure levels. It can also be used, for example, for entertainment noise measurements, where the transmission of bass noise can be a problem.

Z-weighting – dBZ/dB(Z)
‘Zero’ frequency weighting is a flat frequency response between 10 Hz and 20 kHz ±1.5 dB excluding microphone response.

Today, the A-weighting network is the most widely used frequency weighting. C-weighting does not correlate well with subjective tests because the equal loudness contours were based on experiments which used pure tones — and most common sounds are not pure tones, but very complex signals made up of many different tones.

When more detailed information about a complex sound is required, the frequency range from can be divided up into sections or bands. This is done with electronic or digital filters, which reject all sound with frequencies outside the selected band. These bands usually have a bandwidth of either one octave or a third of an octave.

An octave is a frequency band where the highest frequency is twice the lowest frequency. For example, an octave filter with a centre frequency of 1 kHz admits frequencies between 707 and 1414 Hz but rejects all others. (The name octave stems from the fact that an octave covers eight notes of the diatonic musical scale). A third octave covers a range where the highest frequency is 1.26 times the lowest frequency.
Frequency analysis
The process of thus dividing a complex sound is termed frequency analysis and the results are presented on a chart called a spectrogram.

After the signal has been weighted and/or divided into frequency bands, the resultant signal is amplified, and the Root Mean Square (RMS) value determined in an RMS detector. The RMS is a special kind of mathematical average value. It is of importance in sound measurements because the RMS value is directly related to the amount of energy in the sound being measured.
International standards are important either because they are used directly or because they provide inspiration or reference for national standards. There are two main international bodies concerned with standardization.
The International Organization for Standardization (ISO) deals primarily with methodology to ensure that procedures are defined to enable comparison of results. The International Electrotechnical Commission (IEC) ensures that instruments are compatible and can be interchanged without major loss of accuracy or data.

IEC 61672
“IEC 61672 – Electroacoustics – Sound level meters” is the current international standard that sound level meters should meet to satisfy most modern regulations. It specifies “three kinds of sound measuring instruments” - the “conventional” sound level meter, the integrating-averaging sound level meter, and the integrating sound level meter.

The standard is published in three parts:
  • Part 1: Specifications: Requirements for sound level meter performance and functionality for class 1 and class 2 sound level meters
  • Part 2: Pattern evaluation tests: Details of the tests necessary to verify conformance to all mandatory specifications given in IEC 61672-1. Used by test laboratories to ensure that instruments meet manufacturers claims.
  • Part 3: Periodic tests: Procedures for periodic testing of sound level meters conforming to the class 1 or class 2 requirements of IEC 61672-1:2002
It defines the basic terminology including the central Rating Level parameter and describes best practices for assessing environmental noise.


ISO 1996 is a central standard within environmental noise assessment, acting as a reference work on the subject and commonly referred to by regional standards and regulations.

The standard is in two parts:
  • Part 1 (2016): Basic quantities and assessment procedures
  • Part 2 (2017): Determination of sound pressure levels
Calibration is an adjustment of your sound measuring instrument to measure and display correct values. The sensitivity of the transducer, as well as the response of the electronic circuitry, can vary slightly over time or could be affected by environmental conditions such as temperature and humidity. 

While you are unlikely to ever experience a large drift or change in sensitivity, it is nevertheless, good practice to regularly check the calibration of your measuring instrument before and after each set of measurements. This is best done by placing a portable acoustic calibrator directly over the microphone, providing a precisely defined sound pressure level to which the sound level meter can be adjusted.

In addition to checking calibration before and after measurements, many regulations and standards governing sound level measurements often also require that your sound level meter is calibrated in a laboratory once every 12 or 24 months.