TYPE 4370

Low-level Piezoelectric Charge Accelerometer (Top Connector)

Type 4370 is a piezoelectric, DeltaShear®, Unigain® accelerometer with top connector and cable included for general purpose vibration measurements.

問い合わせ・見積依頼

Type 4370 features 10 – 32 UNF receptacle for output connection and can be mounted on the object by means of a 10 – 32 UNF threaded steel stud.

USE SCENARIOS

  • General purpose
  • High sensitivity
  • Low-level, low-frequency measurements

CHARACTERISTICS

This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).

The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular centre post. The ring prestresses the piezoelectric elements to give a high degree of linearity. The charge is collected between the housing and the clamping ring. The piezoelectric element used is a PZ 23 lead zirconate titanate element. The housing material is stainless steel.

CALIBRATION

The sensitivity given in the calibration chart has been measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.

Freq. range
– Hz
Temperature
– ℃
Weight
gram
Sensitivity
10 pC/ms^-2
Residual Noise Level in Spec Freq Range (rms) ±
0.02 mg
Maximum Operational Level (peak)
2000 g
Connector
10-32 UNF
Mounting
Stud
Accessory Included
AO 0038
Clip/Stud/Screw included
YQ 2960
Output
Charge-PE
Unigain
Yes
Triaxial
No
TEDS
No
Applications
General Purpose
Unit
pC
Resonance frequency
16 kHz
Maximum Shock Level (± peak)
2000 g