TYPE 4384

Piezoelectric Charge Accelerometer with Top Connector 

Type 4384 piezoelectric charge accelerometer is designed for general purpose vibration testing and analysis and general-purpose high-frequency measurements. Supplied with cable included.

Angebot anfordern

Type 4384 is a piezoelectric, DeltaShear®, Unigain® accelerometer with top connector. Type 4384 features 10 – 32 UNF receptacle for output connection and can be mounted on the object by means of a 10 – 32 UNF threaded steel stud.

USE SCENARIOS

  • General purpose
  • High sensitivity
  • High-frequency measurement
  • Vibration testing and analysis

CHARACTERISTICS

This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).

The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular centre post. The ring prestresses the piezoelectric elements to give a high degree of linearity. The charge is collected between the housing and the clamping ring. The piezoelectric element used is a PZ 23 lead zirconate titanate element. The housing material is titanium.

CALIBRATION

The sensitivity given in the calibration chart has been measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.

Freq. range
0.1 – 12600 Hz
Temperature
-74 – 250 ℃
Weight
11 gram
Sensitivity
1 pC/ms^-2
Residual Noise Level in Spec Freq Range (rms) ±
0.24 mg
Maximum Operational Level (peak)
6000 g
Connector
10-32 UNF
Mounting
Stud
Accessory Included
AO 0038
Clip/Stud/Screw included
YQ 2960
Output
Charge-PE
Unigain
Yes
Triaxial
No
TEDS
No
Applications
General Purpose
Unit
pC
Resonance frequency
42 kHz
Maximum Shock Level (± peak)
20000 g