TYPE 5958-A

UNDERWATER ACCELEROMETER WITH INTEGRAL CABLE (BNC CONNECTOR)

Underwater accelerometer designed for vibration measurements in wet or seawater conditions, such as seabed installations, submersible craft, offshore oil installations and sea-going vessels.

Angebot anfordern

This rugged accelerometer is suitable for most practical underwater vibration measurements (in wet or seawater conditions), such as seabed installations, submersible craft, offshore oil installations, sea-going vessels etc.

In addition, it is also ideal for monitoring machines that are immersed in various types of fluids such as those found inside gearboxes, pumps, pipelines, etc.

USE SCENARIOS

  • Underwater measurements to 450metres depth
  • Measurement in harsh environments - wet, submerged, or oily environments

FEATURES

  • Low impedance DeltaTron preamplifier
  • Electrically insulated and internally shielded
  • DeltaShear design for low-sensitivity to environmental factors

The unit features an integral cable terminating in a BNC connector. The accelerometer and cable jacket material is highly resistant to oils, solvent, fats, greases and gasoline.

Freq. range
1 – 14000 Hz
Temperature
-50 – 100 ℃
Weight
44 gram
Sensitivity
1 N
Residual Noise Level in Spec Freq Range (rms) ±
0.4 mg
Maximum Operational Level (peak)
500 g
Connector
BNC
Mounting
Stud
Accessory Included
Integral,10m BNC
Clip/Stud/Screw included
None
Output
CCLD
Unigain
No
Triaxial
No
TEDS
No
Applications
Underwater
Unit
mV
Resonance frequency
45 kHz
Maximum Shock Level (± peak)
2000 g