LOG IN
  • Structure-born noise sensor BKS03
  • Dimensional drawing of BKS03 - structure-born noise sensor
Structure-born noise sensor BKS03 Dimensional drawing of BKS03 - structure-born noise sensor

  • BKS03 - Structure-born noise sensor

    A press-on sensor designed to measure structure-borne noise in a test-stand environment – for use in an in-line test stand

    Structure-born noise sensor BKS03

  • Dimensional drawing of BKS03 - structure-born noise sensor

    Dimensional drawing of BKS03 - structure-born noise sensor
Structure-born noise sensor BKS03 Dimensional drawing of BKS03 - structure-born noise sensor

BKS03

Structure-borne noise sensor

A press-on sensor designed to measure structure-borne noise in a test-stand environment

Request Price
BKS03 is a press-on sensor designed to provide high-quality measurements without using adhesive or mounting fixtures. The sensor consists of an accelerometer mounted on a silicon ball and mounting post. In the test stand, the mounting post is connected to an actuator, which presses the accelerometer against the unit under test. A small steel ring is attached to the accelerometer’s contact surface and electrically insulated to prevent malfunction. The lightweight (1.7 g) design and relatively large contact area of the accelerometer combine with the silicon ball’s absorption of vibration to minimize resonance.

USE SCENARIOS

  • Production testing for engines or transmissions
  • On-line production testing
  • Outgoing quality control

SPECIFICATIONS

  • Weight: 1.7 g
  • Frequency response: 15 kHz
  • Sensitivity: 25 mV/g (external ICP® amplifier)
  • Resistant to transmission oil 

For additional specifications that depend on the accelerometer used in the sensor, see the relevant datasheet.

Related

DISCOM analysis systems