Acelerómetro CCLD piezoeléctrico en miniatura

Type 4394 is a piezoelectric DeltaShear, Unigain accelerometer with side connectors. It features an M3 connection and can be mounted on the test object with an M3 threaded stud, and has a ceramic isolated base.

CHARACTERISTICS

This miniature accelerometer may be treated as a voltage source. The sensitivity is expressed in terms of voltage per unit acceleration (mV/ms-2)

The sensitivity given in the calibration chart is measured at 159.2 Hz. For a 95% confidence level, the accuracy of the factory calibrated unit is +/- 0.7%.

USE SCENARIOS

• Shock and vibration measurement and analysis
• Vibration monitoring
• Modal and structural analysis
• Vibration test control
• Production and quality control

The DeltaShear design involves three piezoelectric elements and three masses in a triangular configuration around a central triangular post.

A clamping ring pre-stresses these elements to give a higher degree of linearity. The signal is collected between the housing and the clamping ring and amplified in the built-in CCLD preamplifier.

*CCLD: Constant Current Line Drive - also known as DeltaTron (IEPE compatible)

TYPE 4394 ACCELEROMETER INCLUDES

• Carrying box
• Calibration chart
• Cable: M3 (M) to 10 - 32 UNF (M), 1,2 m, 250° C / 248° F
• Three steel stud with flange, M3/M3, 3.5 mm (YS-8321)