Small-sized structure-borne noise sensor
A press-on sensor designed to measure structure-borne noise in tight or difficult to reach spaces in a test-stand environment.견적 요청하기
BKS10 is a small press-on sensor designed to provide high-quality measurements in tight spaces without using adhesive or mounting fixtures. The sensor consists of an accelerometer mounted on a silicon column and mounting post. To minimize needed space and protect the accelerometer cable, the cable is routed through the silicon column and mounting post. An actuator in the test stand connects to the mounting post and? presses the accelerometer against the unit under test. A small steel plate is attached to the device and electrically isolated to prevent malfunction. The lightweight (1.7 g) design and relatively large contact area of the accelerometer combines with the silicon column’s absorption of vibration to minimize resonance.
- Production testing for engines or transmissions
- On-line production testing in narrow or difficult to reach spaces
- Outgoing quality control
- Weight: 1.7 g
- Frequency response: 15 kHz
- Sensitivity: 10 mV/g (integrated ICP® amplifier)
- Resistant to transmission oil
For additional specifications that depend on the accelerometer used in the sensor, see the relevant datasheet.
뉴스레터를 구독하고 소리와 진동에 대한 최신 이야기를 만나보세요
Brüel & Kjær가 전하는 최신 뉴스가 받은편지함으로 발송되었습니다.
신제품 출시, 할인 및 이벤트
소음 진동 기사, 비디오 및 가이드