Microphone Adaptors
Microphone adaptors for mounting preamplifiers and extension rods with microphones of different diameters. Our range of microphone adaptors also include angle pieces, flexible adaptors for 1/4" to 1/2" microphones, and flush mounting adaptors for both 1/4" inch and 1/2" inch microphones.
-
DP-0978
Adaptor For Calibration Of Our Binaural Microphones
Adaptor for calibration of B&K Binaural Microphones Type 4101
-
DP-0979
Calibration Adaptor For Flush Mounted Surface Microphone
Adaptor for calibrating flush mounted surface microphone
-
UA-1231
Clamping Ring - Adaptor For Type 4226
Clamping ring adaptor for B&K Type 4226 Multifunction Acoustic Calibrator.
-
UA-0123
Adaptor For Mounting A 1/4" Microphone To A 1/2" Preamplifier
Straight flexible adaptor enabling mounting of a 1/4‐inch microphone to a 1/2‐inch preamplifier and for flush mounting of a 1/4‐ and 1/2‐inch microphone.
-
UA1260
Microphone Adaptor For 1/2" Microphone To 1/2" Preamplifier
Right angle adaptor for 1/2‐inch microphone to 1/2‐inch preamplifier, providing a 80° (approximately) angle piece,
-
UA-0160
Microphone Adaptor For 1/8" Microphones To Fit 1/4" Preamplifier
1/8‐inch microphone adaptor to 1/4‐inch preamplifier (driven shield 2.44 pF)
-
UA-0196
Flexible Extension Rod For 1/2" Microphones, 210 mm
1/2‐inch to 1/2‐inch (driven shield 0.22 pF) flexibal extension rod
-
WA-0658
Coupler for Type 8106 Hydrophone
-
WA-0406
Adaptor For 1/8'' Microphones And 1/2" Preamplifier
1/8' Microphone adaptor for Mounting Preamplifiers
-
WA-0728
Adaptor For Pistonphone With 6 Channels
Adaptor for the Pistonphone Calibrator enables 6 channels for calibrating multiple devices.
-
UC-0210
Calibration Adaptor For 1/2″ Microphones
Microphone calibration adaptor designed to fit a 1/2-inch microphone with B&K Type 4231 Sound Calibrator.
-
WA-0371
Adaptor To Fit A 1/4" Microphone With A 1/2" Preamplifier
Short version 1/4‐inch microphone adaptor for mounting a 1/2-inch preamplifier.
-
UC-0211
Infrasound / Low Frequency Adaptor
This Infrasound adaptor is designed for measuring sound at frequencies below the audible range (below about 16 Hz).
-
UA-0122
Adaptor With Right Angle For Mounting A 1/4" Microphone To A 1/2" Preamplifier
Adaptor for right angle mounting of a 1/4-inch to 1/2-inch preamplifier. This adaptor also enables flush mounting of 1/4‐inch and 1/2‐inch measurement microphones.
-
DP-0774
Calibration Adaptor For 1/8-Inch Measurement Microphones
Calibration Adaptor For 1/8" Microphones on Calibrator Type 4228 or Type 4231
-
DP-0775
Calibration Adaptor For 1/4" Measurement Microphones
Calibration Adaptor for 1/4" Measurement Microphones on Calibrator Type 4228 or Type 4231
-
DP-0776
Calibration Adaptor For 1/2" Microphones
1/2" microphone adaptor for calibration with Type 4228 Pistonphone.
-
DB-0375
Adaptor For 1" Microphone To 1/2" Preamplifier
1‐inch microphone adaptor for mounting 1/2‐inch preamplifier
-
DB-0962
Adaptor, To Mount 1" Microphone On 1/2" Preamplifier
1" microphone adaptor to mount on 1/2" preamplifier
-
DB-3611
Extension Adaptor To Mount Type 2231 Inside Kit UA-1404
This extension adaptor it possible to mount the preamplifier from Sound Level Meter Type 2231 inside Outdoor Kit UA‐1404
-
EU-4000
1/4" Angle Piece Microphone Adaptor
1/4‐inch to 1/4‐inch (driven shield 0.97 pF) with 90° angle piece
-
UA-0035
Adaptor For A 1/4" Microphones To 1/2" Preamplifiers
Microphone adaptor designed to for mounting a 1/4" measurement microphone with a 1/2" preamplifier
-
UA-0036
Adaptor For Mounting A 1/8" Microphones To A 1/2" Preamplifier
Adaptor designed for mounting a 1/8" measurement microphone to a 1/2" preamplifier.
-
DP-0977
Adaptor For Calibration Of Flanged Surface Microphone
Microphone adaptor for calibration of unflanged surface microphone
-
UA-0786
1" Microphone Adaptor To 1/2" Preamplifier
Adaptor for mounting 1/2" preamplifier type 2645 and type 2673.