Microphone adaptors for mounting preamplifiers and extension rods with microphones of different diameters. Our range of microphone adaptors also include angle pieces, flexible adaptors for 1/4" to 1/2" microphones, and flush mounting adaptors for both 1/4" inch and 1/2" inch microphones.
Calibration Adaptor for 1/2" Microphones
1/2" microphone adaptor for calibration with Type 4228 Pistonphone.
Adaptor for 1/8'' Microphones and 1/2" Preamplifier
1/8' Microphone adaptor for Mounting Preamplifiers
Adaptor to fit a 1/4" Microphone with a 1/2" Preamplifier
Short version 1/4‐inch microphone adaptor for mounting a 1/2-inch preamplifier.
Adaptor, to mount 1" microphone on 1/2" preamplifier
1" microphone adaptor to mount on 1/2" preamplifier
Adaptor for 1" microphone to 1/2" preamplifier
1‐inch microphone adaptor for mounting 1/2‐inch preamplifier
Adaptor for calibration of unflanged surface microphone
Microphone adaptor for calibration of unflanged surface microphone
Calibration adaptor for flush mounted surface microphone
Adaptor for calibrating flush mounted surface microphone
Calibration Adaptor for 1/4" Measurement Microphones
Calibration Adaptor for 1/4" Measurement Microphones on Calibrator Type 4228 or Type 4231
Calibration Adaptor for 1/8-inch Measurement Microphones
Calibration Adaptor For 1/8" Microphones on Calibrator Type 4228 or Type 4231
Extension adaptor to mount Sound Level Meter Type 2231 inside Outdoor Microphone Kit UA-1404
This extension adaptor it possible to mount the preamplifier from Sound Level Meter Type 2231 inside Outdoor Kit UA‐1404
Adaptor for calibration of our Binaural Microphones
Adaptor for calibration of B&K Binaural Microphones Type 4101
Coupler for Hydrophone
Coupler for Type 8106 Hydrophone
This Infrasound adaptor is designed for measuring sound at frequencies below the audible range (below about 16 Hz).
Adaptor for Pistonphone with 6 Channels
Adaptor for the Pistonphone Calibrator enables 6 channels for calibrating multiple devices.
Adaptor to fit a 1/2" Microphone with Type 4231 Calibrator
Microphone adaptor designed to fit a 1/2-inch microphone with Type 4241 Acoustic Calibrator.
Microphone Adaptor for 1/2" Microphone to 1/2" Preamplifier
Right angle adaptor for 1/2‐inch microphone to 1/2‐inch preamplifier, providing a 80° (approximately) angle piece,
Clamping Ring - Adaptor for Type 4226
Clamping ring adaptor for B&K Type 4226 Multifunction Acoustic Calibrator.
1" microphone adaptor to 1/2" preamplifier
Adaptor for mounting 1/2" preamplifier type 2645 and type 2673.
Flexible extension rod for 1/2" microphones, 210 mm
1/2‐inch to 1/2‐inch (driven shield 0.22 pF) flexibal extension rod
Adaptor for Mounting a 1/4" Microphone to a 1/2" Preamplifier
Straight flexible adaptor enabling mounting of a 1/4‐inch microphone to a 1/2‐inch preamplifier and for flush mounting of a 1/4‐ and 1/2‐inch microphone.
Microphone adaptor for 1/8" microphones to fit 1/4" preamplifier
1/8‐inch microphone adaptor to 1/4‐inch preamplifier (driven shield 2.44 pF)
Adaptor for mounting a 1/8" microphones to a 1/2" preamplifier
Adaptor designed for mounting a 1/8" measurement microphone to a 1/2" preamplifier.
Adaptor with right angle for mounting a 1/4" microphone to a 1/2" preamplifier
Adaptor for right angle mounting of a 1/4-inch to 1/2-inch preamplifier. This adaptor also enables flush mounting of 1/4‐inch and 1/2‐inch measurement microphones.
1/4" Angle Piece Microphone Adaptor
1/4‐inch to 1/4‐inch (driven shield 0.97 pF) with 90° angle piece
Adaptor for a 1/4" microphones to 1/2" preamplifiers
Microphone adaptor designed to for mounting a 1/4" measurement microphone with a 1/2" preamplifier