TYPE 4529-B

Triaxial CCLD Accelerometer

With a high dynamic range, this triaxial CCLD accelermeter covers a wide range of applications, including on‐road and modal testing.

견적 요청하기

The family of Triaxial CCLD / IEPE Accelerometer Type 4529 replaces the extremely popular Type 4506 family, using the same flexible mounting accessories to save set-up time and ensure accurate local coordination. Due to their high dynamic range, the accelerometers cover a wide range of applications, including on-road and modal testing. 

To make mounting as flexible as possible, the accelerometer housing has slots to be used in combination with a selection of mounting clips. The clips are attached to the test object with glue or double-sided, adhesive tape. This design allows the accelerometer to be easily fitted to and removed from a number of different objects, for example, during calibration.

USE SCENARIOS

  • Multi‐purpose test applications due to a high dynamic range
  • Multi‐channel modal and structural analysis measurements
  • On‐road vechicle test

Triaxial Accelerometer Type 4529 requires a cable with a 4-pin Microtech connector. Brüel & Kjær can supply cables with connector configurations of two 4-pin Microtech connectors, 4-pin Microtech to 3 × BNC connectors and 4-pin Microtech to 3 × 10–32 UNF connectors for a range of temperatures. For powering two accelerometers from a D-range subconnector, cable AO-0536 is available.

Freq. range
0.3 – 12800 Hz
Temperature
-60 – 125 ℃
Weight
14.5 gram
Sensitivity
10 mV/ms^-2
Residual Noise Level in Spec Freq Range (rms) ±
mg
Maximum Operational Level (peak)
71 g
Connector
4-pin
Mounting
Clip
Clip/Stud/Screw included
Clip
Output
CCLD
Unigain
No
Triaxial
Yes
TEDS
Yes
Applications
Miniature, Modal
Unit
mV
Resonance frequency
X39-Y19-Z19 kHz
Maximum Shock Level (± peak)
5100 g