High-Frequency Low-Weight Piezoelectric Charge Accelerometer
Type 4393 Piezoelectric Charge Accelerometer is designed for high-frequency low weight measurements. Delivered with cable.견적 요청하기
Type 4393 is a piezoelectric, DeltaShear®, Unigain® accelerometer with side connector. Type 4393 features M3 receptacle for output connection and has an M3 hole for mounting.
- High frequency
- Low weight
- Vibration testing and analysis
This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).
The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular centre post. The ring prestresses the piezoelectric elements to give a high degree of linearity. The charge is collected between the housing and the clamping ring. The piezoelectric element used is a PZ 23 lead zirconate titanate element. The housing material is titanium.
The sensitivity given in the calibration chart has been measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.
- Freq. range
- 0.1 – 16500 Hz
- -74 – 250 ℃
- 2.4 gram
- 0.316 pC/ms^-2
- Residual Noise Level in Spec Freq Range (rms) ±
- 0.52 mg
- Maximum Operational Level (peak)
- 5000 g
- Accessory Included
- AO 0283
- Clip/Stud/Screw included
- YQ 2003
- Resonance frequency
- 55 kHz
- Maximum Shock Level (± peak)
- 25000 g