Triaxial Piezoelectric Charge Accelerometer, Incl. Cable
Triaxial Piezoelectric Charge Accelerometer designed for general purpose vibration measurements on larger structures.견적 요청하기
Type 4321 is a triaxial, piezoelectric, DeltaShear®, Unigain‚ accelerometer with three independent outputs for simultaneous high-level measurements in three mutually perpendicular directions. Each transducing element is individually adjusted.
Type 4321 features three 10 – 32 UNF-2A receptacles for output connection and can be mounted on the object with a 10 – 32 UNF threaded steel stud or M4 screw.
- Vibration analysis on larger structures
This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).
The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular centre post. The DeltaShear design provides a high sensitivity-to-mass ratio compared to other designs, a relatively high resonance frequency and high isolation from base strains and temperature transients.
The piezoelectric element used in Type 4321 is a PZ 23 lead zirconate titanate element. The housing material is titanium.
The sensitivity given in the calibration chart is measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.
- Freq. range
- – Hz
- – ℃
- 1 pC/ms^-2
- Residual Noise Level in Spec Freq Range (rms) ±
- 0.23 mg
- Maximum Operational Level (peak)
- 500 g
- 10-32 UNF
- Accessory Included
- AO 0038
- Clip/Stud/Screw included
- YQ 2960
- General Purpose, Vibration Test
- Resonance frequency
- 40 kHz
- Maximum Shock Level (± peak)
- 1000 g
뉴스레터를 구독하고 소리와 진동에 대한 최신 이야기를 만나보세요
Brüel & Kjær가 전하는 최신 뉴스가 받은편지함으로 발송되었습니다.
신제품 출시, 할인 및 이벤트
소음 진동 기사, 비디오 및 가이드