TYPE 4321

Triaxial Piezoelectric Charge Accelerometer, Incl. Cable

Triaxial Piezoelectric Charge Accelerometer designed for general purpose vibration measurements on larger structures.

見積もり依頼

Type 4321 is a triaxial, piezoelectric, DeltaShear®, Unigain‚ accelerometer with three independent outputs for simultaneous high-level measurements in three mutually perpendicular directions. Each transducing element is individually adjusted.

Type 4321 features three 10 – 32 UNF-2A receptacles for output connection and can be mounted on the object with a 10 – 32 UNF threaded steel stud or M4 screw.

USE SCENARIO

  • Vibration analysis on larger structures

CHARACTERISTICS

This piezoelectric accelerometer may be treated as a charge source. Its sensitivity is expressed in terms of charge per unit acceleration (pC/g).

The DeltaShear design involves three piezoelectric elements and three masses arranged in a triangular configuration around a triangular centre post. The DeltaShear design provides a high sensitivity-to-mass ratio compared to other designs, a relatively high resonance frequency and high isolation from base strains and temperature transients.

The piezoelectric element used in Type 4321 is a PZ 23 lead zirconate titanate element. The housing material is titanium.

CALIBRATON

The sensitivity given in the calibration chart is measured at 159.2 Hz and an acceleration of 10 g. For 99.9% confidence level, the accuracy of the factory calibration is ± 2%.

Freq. range
– Hz
Temperature
– ℃
Weight
gram
Sensitivity
1 pC/ms^-2
Residual Noise Level in Spec Freq Range (rms) ±
0.23 mg
Maximum Operational Level (peak)
500 g
Connector
10-32 UNF
Mounting
Stud
Accessory Included
AO 0038
Clip/Stud/Screw included
YQ 2960
Output
Charge-PE
Unigain
Yes
Triaxial
No
TEDS
No
Applications
General Purpose, Vibration Test
Unit
pC
Resonance frequency
40 kHz
Maximum Shock Level (± peak)
1000 g